Campervan interior insulated with cork spray
Campervan Insulation Ireland

Cork Spray Campervan Insulation — A Dry, Quiet, Year-Round Camper

Spray-applied cork for camper van conversions in Ireland — follows every curve and rib with no gaps, stops the condensation that causes damp and mould, and deadens road noise for a genuinely comfortable touring interior.

083 098 2463

The best insulation for a campervan in Ireland

Campervan living puts extreme demands on an insulation system. A tiny metal box parked in the Irish winter needs to hold heat from a modest heater, while the same van in summer sun must stay bearable. And every night you sleep in it, you exhale litres of moisture into the space — moisture that has to go somewhere.

Traditional board-and-wool conversions fight all of this with gaps, voids and vapour barriers that trap damp against the cold steel. Cork spray takes a different approach: it coats every surface in a breathable, thermally-resistant layer that follows ribs, wheel arches and curved roofs with no cold bridges and nowhere for mould to hide.

The result is a drier, quieter, warmer camper — and a steel shell that stays rust-free for the life of the van.

Why Cork Spray for Campervans

Solving the four problems every camper conversion faces

Year-Round Comfort

Stays warm on winter touring trips and cool when parked in summer sun — a livable interior in every season.

No More Damp & Mould

Breathable cork stops the condensation that causes streaming windows, musty smells and mould in living spaces.

Quiet Cabins

Cork absorbs road rumble, rattles and engine noise, so sleeping and relaxing are genuinely peaceful.

Breathable & Safe

Vapour-permeable cork lets moisture breathe out, so the steel shell stays dry and rust-free for the life of the van.

Cork vs Traditional Camper Insulation

Why not just use foam boards and wool?

Most Irish campervan conversions are built with rigid foam boards glued to the metal shell, with mineral wool stuffed into the gaps. But every rib, every curve and every wheel arch is a gap — and a gap is exactly where cold bridges, condensation and mould begin.

Cork spray is spray-applied, so it follows every contour with zero voids. And unlike foam boards and vapour barriers, cork is breathable: the moisture you breathe out at night can pass through it and escape, instead of being trapped against cold steel where it causes rust and rot.

Cork also deadens sound, so you get thermal insulation, vapour control and acoustic damping in a single product — no separate mass-loaded vinyl required.

Covers every contour — ribs, wheel arches, curved roof, no gaps or cold bridges
Breathable — trapped moisture breathes out instead of rotting the lining
Built-in sound deadening — no need for separate mass-loaded vinyl
No voids where mould and rust can hide behind boards
Bonds to clean metal, timber, GRP and existing coatings
Ready to line over with ply, carpet or felt the next day
Suitable For

Built for every type of camper

VW Transporter & California conversions
Ford Transit & Custom campervan builds
Mercedes Sprinter & Vito campers
Box-body and horsebox living conversions
Refrigerated and day-van refits
Self-build and professional conversion projects
FAQ

Campervan insulation — common questions

Ready to insulate your campervan?

Get a free quote — most camper conversions are sprayed in a single day.

Call 083 098 2463